mlkem_top now sizes storage for KMAX=4 (worst case) and selects the
active ML-KEM parameter set at start_i via the k_i input. All K-derived
quantities (eta1, slot bases, ek/dk byte counts, H(ek) block count, FSM
bounds) are computed at runtime from the captured k_r.
Verified byte-exact against NIST KAT for all three parameter sets:
K=2 (512) cases 0-4, K=3 (768) cases 0-2, K=4 (1024) cases 0-2
-> 11/11 PASS (ek==pk, dk==sk).
The parametric KAT TB (KP generic) builds filenames kat_k<K>_c<n>_*.hex, but
the K=2 vectors were committed earlier as kat_c<n>_*.hex (no k2 prefix), so
run_tb.sh top emitted 'file cannot be opened' warnings for K=2 and the data
read as X. Add kat_k2_* copies so all three parameter sets load cleanly.
./run_tb.sh top now: 0 file warnings, all 11 cases PASS (K=2:0..4, K=3:0..2,
K=4:0..2), exit 0.
./run_tb.sh top now compiles the full KeyGen datapath + tb_mlkem_kg_katN
and runs all 5 NIST KAT cases (ek==pk 800B, dk==sk 1632B byte-exact).
Also registers 'top' in ./run_tb.sh --list.
Add ST_H stage: second sha3_top (mb_en=1) computes H(ek) over 800B ek as 6
pre-padded SHA3-256 rate blocks. Per block: assemble 136 bytes (h_padbyte
applies 0x06...0x80 padding on final block) into h_block_r, feed (hold valid
until mb_ready drops), wait permute; capture digest on last block into hek_r.
Full dk readback tap: dk = dk_pke(768) || ek(800) || H(ek)(32) || z(32) = 1632B.
End-to-end TB (tb_mlkem_kg_kat_xsim, no force/release): drive KAT count=0 d/z,
run full KeyGen FSM (IDLE->G->A->C->N->M->E->H->DONE), verify:
ek == KAT pk (800B) byte-exact
dk == KAT sk (1632B) byte-exact
Done in 21403 cycles. ML-KEM-512 KeyGen complete and KAT-verified.
Prior stage TBs (2c/2e/2f) still pass (no regression).
Add ST_N stage: forward NTT (ntt_core mode=0, no scaling) of s[0],s[1],
e[0],e[1] in place (slots S0,S1,E0,E1). Per slot: stream 256 coeffs into
ntt_core during LOAD, collect 256 outputs back to same slot. n_pending
waits for core IDLE between slots.
Verified vs ml-kem-r golden: 1024/1024 shat/ehat coeffs exact (17318 cyc).
- gen_vectors.py: parse kat_MLKEM_512.rsp, generate hex vectors
- tb_mlkem_top_xsim.v: force-inject d/msg/z for KAT testing
- mlkem_top_input.hex: 5 vectors (d + msg + z)
- mlkem_top_expected.hex: 5 vectors (pk + sk + ct + ss)
- xsim_run.tcl: full dependency chain compilation
Known issue: mlkem_top FSM has combinational race on rng_valid_i
- rng_valid_i driven by state_r (registered) causes rng_sync
to miss valid_i pulse when state transitions at posedge
- Fix: change rng_valid_i to use state_next pattern
(same as sha3_top uses state_next for kc_valid_i)
