fallensigh/ciciec2026
Archived
0
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Optimize CDMA matmul bridge scheduling

Browse Source
This commit is contained in:
FallenSigh
2026-07-04 19:59:49 +08:00
parent c37f493bcb
commit 27cdfb713a
3 changed files with 106 additions and 40 deletions
Download Patch File Download Diff File Expand all files Collapse all files

41
rtl/ip/cdma/snix_axil_cdma_mux.sv
View File

@@ -401,7 +401,6 @@ module snix_axil_cdma_mux #(
logic ep_rready;
logic ext_active;
logic ext_start_pulse;
logic [1:0] ext_mode_r;
logic [ADDR_WIDTH-1:0] ext_src_r;
logic [ADDR_WIDTH-1:0] ext_dst_r;
@@ -410,22 +409,23 @@ module snix_axil_cdma_mux #(
logic [3:0] ext_ep_bank_r;
logic [7:0] ext_ep_word_off_r;
wire use_ep_engine = ((state == RUN) && (engine_mode != MODE_MEM2MEM)) || ext_active || ext_start_pulse;
wire select_ext_ep = ext_active || ext_start_pulse;
wire ext_accept = ext_req_valid && ext_req_ready;
wire use_ep_engine = ((state == RUN) && (engine_mode != MODE_MEM2MEM)) || ext_active || ext_accept;
wire select_ext_ep = ext_active || ext_accept;
// Dynamic routing to the engine based on current active channel
assign engine_src = select_ext_ep ? ext_src_r : ch_src_addr[cur_ch];
assign engine_dst = select_ext_ep ? ext_dst_r : ch_dst_addr[cur_ch];
assign engine_bytes = select_ext_ep ? ext_bytes_r : ch_len[cur_ch];
assign engine_src = ext_accept ? ext_req_src : (select_ext_ep ? ext_src_r : ch_src_addr[cur_ch]);
assign engine_dst = ext_accept ? ext_req_dst : (select_ext_ep ? ext_dst_r : ch_dst_addr[cur_ch]);
assign engine_bytes = ext_accept ? ext_req_bytes : (select_ext_ep ? ext_bytes_r : ch_len[cur_ch]);
assign engine_len = ch_ctrl[cur_ch][13:6];
assign engine_size = ch_ctrl[cur_ch][5:3];
assign engine_mode = select_ext_ep ? ext_mode_r : ch_mode[cur_ch][1:0];
assign engine_ep_bank = select_ext_ep ? ext_ep_bank_r : ch_ep_cfg[cur_ch][3:0];
assign engine_ep_word_off = select_ext_ep ? ext_ep_word_off_r : ch_ep_cfg[cur_ch][15:8];
assign engine_ep_id = select_ext_ep ? ext_ep_id_r : ch_ep_cfg[cur_ch][19:16];
assign engine_mode = ext_accept ? ext_req_mode : (select_ext_ep ? ext_mode_r : ch_mode[cur_ch][1:0]);
assign engine_ep_bank = ext_accept ? ext_req_ep_bank : (select_ext_ep ? ext_ep_bank_r : ch_ep_cfg[cur_ch][3:0]);
assign engine_ep_word_off = ext_accept ? ext_req_ep_word_off : (select_ext_ep ? ext_ep_word_off_r : ch_ep_cfg[cur_ch][15:8]);
assign engine_ep_id = ext_accept ? ext_req_ep_id : (select_ext_ep ? ext_ep_id_r : ch_ep_cfg[cur_ch][19:16]);
assign engine_done = (engine_mode == MODE_MEM2MEM) ? mm2mm_done : ep_done;
assign mm2mm_start = engine_start && (engine_mode == MODE_MEM2MEM);
assign ep_start = ext_start_pulse || (engine_start && (engine_mode != MODE_MEM2MEM));
assign ep_start = ext_accept || (engine_start && (engine_mode != MODE_MEM2MEM));
assign core_awready = (!use_ep_engine) && mm2mm_awready;
assign core_wready = (!use_ep_engine) && mm2mm_wready;
@@ -562,12 +562,11 @@ module snix_axil_cdma_mux #(
// ==========================================
// Generic external endpoint requester
// ==========================================
assign ext_req_ready = !ext_active && (state == IDLE);
assign ext_req_ready = !ext_active && (state == IDLE) && (ep_state == EP_IDLE);
always_ff @(posedge clk) begin
if (!rst_n) begin
ext_active <= 1'b0;
ext_start_pulse <= 1'b0;
ext_req_done <= 1'b0;
ext_mode_r <= MODE_MEM2EP;
ext_src_r <= '0;
@@ -577,12 +576,10 @@ module snix_axil_cdma_mux #(
ext_ep_bank_r <= '0;
ext_ep_word_off_r <= '0;
end else begin
ext_start_pulse <= 1'b0;
ext_req_done <= 1'b0;
if (ext_req_valid && ext_req_ready) begin
if (ext_accept) begin
ext_active <= 1'b1;
ext_start_pulse <= 1'b1;
ext_mode_r <= ext_req_mode;
ext_src_r <= ext_req_src;
ext_dst_r <= ext_req_dst;
@@ -640,8 +637,10 @@ module snix_axil_cdma_mux #(
if (mm2mm_rvalid && ep_rready) begin
ep_word_addr_r <= ep_word_addr_r + 8'd1;
ep_bytes_left <= (ep_bytes_left > 32'd4) ? (ep_bytes_left - 32'd4) : 32'd0;
if (mm2mm_rlast)
ep_state <= EP_DONE;
if (mm2mm_rlast) begin
ep_done <= 1'b1;
ep_state <= EP_IDLE;
end
end
end
@@ -660,8 +659,10 @@ module snix_axil_cdma_mux #(
end
EP_BRESP: begin
if (mm2mm_bvalid && ep_bready)
ep_state <= EP_DONE;
if (mm2mm_bvalid && ep_bready) begin
ep_done <= 1'b1;
ep_state <= EP_IDLE;
end
end
EP_DONE: begin