initial commit

This commit is contained in:
2026-04-12 22:20:18 +08:00
commit 190c2edbb2
155 changed files with 36314 additions and 0 deletions

View File

@@ -0,0 +1,193 @@
/*------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Copyright (c) 2016, Loongson Technology Corporation Limited.
All rights reserved.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation and/or
other materials provided with the distribution.
3. Neither the name of Loongson Technology Corporation Limited nor the names of
its contributors may be used to endorse or promote products derived from this
software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL LOONGSON TECHNOLOGY CORPORATION LIMITED BE LIABLE
TO ANY PARTY FOR DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
--------------------------------------------------------------------------------
------------------------------------------------------------------------------*/
`include "uart_defines.h"
module uart_rfifo (clk,
wb_rst_i, data_in, data_out,
push,
pop,
overrun,
count,
error_bit,
fifo_reset,
reset_status
);
parameter fifo_width = `UART_FIFO_WIDTH;
parameter fifo_depth = `UART_FIFO_DEPTH;
parameter fifo_pointer_w = `UART_FIFO_POINTER_W;
parameter fifo_counter_w = `UART_FIFO_COUNTER_W;
input clk;
input wb_rst_i;
input push;
input pop;
input [fifo_width-1:0] data_in;
input fifo_reset;
input reset_status;
output [fifo_width-1:0] data_out;
output overrun;
output [fifo_counter_w-1:0] count;
output error_bit;
wire [fifo_width-1:0] data_out;
wire [7:0] data8_out;
reg [2:0] fifo[fifo_depth-1:0];
reg [fifo_pointer_w-1:0] top;
reg [fifo_pointer_w-1:0] bottom;
reg [fifo_counter_w-1:0] count;
reg overrun;
wire [fifo_pointer_w-1:0] top_plus_1 = top + 1'b1;
raminfr #(fifo_pointer_w,8,fifo_depth) rfifo (.clk(clk),
.we(push),
.a(top),
.dpra(bottom),
.di(data_in[fifo_width-1:fifo_width-8]),
.dpo(data8_out)
);
always @(posedge clk)
begin
if (wb_rst_i)
begin
top <= 0;
bottom <= 1'b0;
count <= 0;
fifo[0] <= 0;
fifo[1] <= 0;
fifo[2] <= 0;
fifo[3] <= 0;
fifo[4] <= 0;
fifo[5] <= 0;
fifo[6] <= 0;
fifo[7] <= 0;
fifo[8] <= 0;
fifo[9] <= 0;
fifo[10]<= 0;
fifo[11]<= 0;
fifo[12]<= 0;
fifo[13]<= 0;
fifo[14]<= 0;
fifo[15]<= 0;
end
else
if (fifo_reset) begin
top <= 0;
bottom <= 1'b0;
count <= 0;
fifo[0] <= 0;
fifo[1] <= 0;
fifo[2] <= 0;
fifo[3] <= 0;
fifo[4] <= 0;
fifo[5] <= 0;
fifo[6] <= 0;
fifo[7] <= 0;
fifo[8] <= 0;
fifo[9] <= 0;
fifo[10]<= 0;
fifo[11]<= 0;
fifo[12]<= 0;
fifo[13]<= 0;
fifo[14]<= 0;
fifo[15]<= 0;
end
else
begin
case ({push, pop})
2'b10 : if (count<fifo_depth)
begin
top <= top_plus_1;
fifo[top] <= data_in[2:0];
count <= count + 1'b1;
end
2'b01 : if(count>0)
begin
fifo[bottom] <= 0;
bottom <= bottom + 1'b1;
count <= count - 1'b1;
end
2'b11 : begin
bottom <= bottom + 1'b1;
top <= top_plus_1;
fifo[top] <= data_in[2:0];
end
default: ;
endcase
end
end
always @(posedge clk)
begin
if (wb_rst_i)
overrun <= 1'b0;
else
if(fifo_reset | reset_status)
overrun <= 1'b0;
else
if(push & ~pop & (count==fifo_depth))
overrun <= 1'b1;
end
assign data_out = {data8_out,fifo[bottom]};
wire [2:0] word0 = fifo[0];
wire [2:0] word1 = fifo[1];
wire [2:0] word2 = fifo[2];
wire [2:0] word3 = fifo[3];
wire [2:0] word4 = fifo[4];
wire [2:0] word5 = fifo[5];
wire [2:0] word6 = fifo[6];
wire [2:0] word7 = fifo[7];
wire [2:0] word8 = fifo[8];
wire [2:0] word9 = fifo[9];
wire [2:0] word10 = fifo[10];
wire [2:0] word11 = fifo[11];
wire [2:0] word12 = fifo[12];
wire [2:0] word13 = fifo[13];
wire [2:0] word14 = fifo[14];
wire [2:0] word15 = fifo[15];
assign error_bit = |(word0[2:0] | word1[2:0] | word2[2:0] | word3[2:0] |
word4[2:0] | word5[2:0] | word6[2:0] | word7[2:0] |
word8[2:0] | word9[2:0] | word10[2:0] | word11[2:0] |
word12[2:0] | word13[2:0] | word14[2:0] | word15[2:0] );
endmodule