253 lines
33 KiB
Plaintext
253 lines
33 KiB
Plaintext
Copyright 1986-2019 Xilinx, Inc. All Rights Reserved.
|
|
----------------------------------------------------------------------------------------------------------------------
|
|
| Tool Version : Vivado v.2019.2 (lin64) Build 2708876 Wed Nov 6 21:39:14 MST 2019
|
|
<<<<<<< Updated upstream
|
|
| Date : Fri Jul 10 04:14:40 2026
|
|
=======
|
|
| Date : Sat Jul 11 09:20:47 2026
|
|
>>>>>>> Stashed changes
|
|
| Host : fedora running 64-bit unknown
|
|
| Command : report_drc -file /home/fallensigh/Dev/ciciec2026_loongson_regional/fpga/vivado_reports_nodsp/drc.rpt
|
|
| Design : soc_top
|
|
| Device : xc7a200tfbg676-1
|
|
| Speed File : -1
|
|
| Design State : Fully Routed
|
|
----------------------------------------------------------------------------------------------------------------------
|
|
|
|
Report DRC
|
|
|
|
Table of Contents
|
|
-----------------
|
|
1. REPORT SUMMARY
|
|
2. REPORT DETAILS
|
|
|
|
1. REPORT SUMMARY
|
|
-----------------
|
|
Netlist: netlist
|
|
Floorplan: impl_1
|
|
Design limits: <entire design considered>
|
|
Ruledeck: default
|
|
Max violations: <unlimited>
|
|
Violations found: 42
|
|
+-----------+----------+----------------------------+------------+
|
|
| Rule | Severity | Description | Violations |
|
|
+-----------+----------+----------------------------+------------+
|
|
| CHECK-3 | Warning | Report rule limit reached | 2 |
|
|
| REQP-1839 | Warning | RAMB36 async control check | 20 |
|
|
| REQP-1840 | Warning | RAMB18 async control check | 20 |
|
|
+-----------+----------+----------------------------+------------+
|
|
|
|
2. REPORT DETAILS
|
|
-----------------
|
|
CHECK-3#1 Warning
|
|
Report rule limit reached
|
|
REQP-1839 rule limit reached: 20 violations have been found.
|
|
Related violations: <none>
|
|
|
|
CHECK-3#2 Warning
|
|
Report rule limit reached
|
|
REQP-1840 rule limit reached: 20 violations have been found.
|
|
Related violations: <none>
|
|
|
|
REQP-1839#1 Warning
|
|
RAMB36 async control check
|
|
The RAMB36E1 u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ff_im_reg has an input control pin u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ff_im_reg/ADDRARDADDR[13] (net: u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ADDRARDADDR[8]) which is driven by a register (u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/bf2_count_reg[0]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1839#2 Warning
|
|
RAMB36 async control check
|
|
The RAMB36E1 u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ff_im_reg has an input control pin u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ff_im_reg/ADDRARDADDR[13] (net: u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ADDRARDADDR[8]) which is driven by a register (u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/bf2_count_reg[1]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1839#3 Warning
|
|
RAMB36 async control check
|
|
The RAMB36E1 u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ff_im_reg has an input control pin u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ff_im_reg/ADDRARDADDR[13] (net: u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ADDRARDADDR[8]) which is driven by a register (u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/bf2_count_reg[2]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1839#4 Warning
|
|
RAMB36 async control check
|
|
The RAMB36E1 u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ff_im_reg has an input control pin u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ff_im_reg/ADDRARDADDR[13] (net: u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ADDRARDADDR[8]) which is driven by a register (u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/bf2_count_reg[3]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1839#5 Warning
|
|
RAMB36 async control check
|
|
The RAMB36E1 u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ff_im_reg has an input control pin u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ff_im_reg/ADDRARDADDR[13] (net: u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ADDRARDADDR[8]) which is driven by a register (u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/bf2_count_reg[4]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1839#6 Warning
|
|
RAMB36 async control check
|
|
The RAMB36E1 u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ff_im_reg has an input control pin u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ff_im_reg/ADDRARDADDR[13] (net: u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ADDRARDADDR[8]) which is driven by a register (u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/bf2_count_reg[5]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1839#7 Warning
|
|
RAMB36 async control check
|
|
The RAMB36E1 u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ff_im_reg has an input control pin u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ff_im_reg/ADDRARDADDR[13] (net: u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ADDRARDADDR[8]) which is driven by a register (u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/bf2_count_reg[6]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1839#8 Warning
|
|
RAMB36 async control check
|
|
The RAMB36E1 u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ff_im_reg has an input control pin u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ff_im_reg/ADDRARDADDR[13] (net: u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ADDRARDADDR[8]) which is driven by a register (u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/bf2_count_reg[7]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1839#9 Warning
|
|
RAMB36 async control check
|
|
The RAMB36E1 u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ff_im_reg has an input control pin u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ff_im_reg/ADDRARDADDR[13] (net: u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ADDRARDADDR[8]) which is driven by a register (u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/bf2_count_reg[8]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1839#10 Warning
|
|
RAMB36 async control check
|
|
The RAMB36E1 u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ff_im_reg has an input control pin u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ff_im_reg/ADDRARDADDR[13] (net: u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ADDRARDADDR[8]) which is driven by a register (u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/bf2_count_reg[9]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1839#11 Warning
|
|
RAMB36 async control check
|
|
The RAMB36E1 u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ff_im_reg has an input control pin u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ff_im_reg/ADDRARDADDR[14] (net: u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ADDRARDADDR[9]) which is driven by a register (u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/bf2_count_reg[0]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1839#12 Warning
|
|
RAMB36 async control check
|
|
The RAMB36E1 u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ff_im_reg has an input control pin u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ff_im_reg/ADDRARDADDR[14] (net: u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ADDRARDADDR[9]) which is driven by a register (u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/bf2_count_reg[1]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1839#13 Warning
|
|
RAMB36 async control check
|
|
The RAMB36E1 u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ff_im_reg has an input control pin u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ff_im_reg/ADDRARDADDR[14] (net: u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ADDRARDADDR[9]) which is driven by a register (u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/bf2_count_reg[2]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1839#14 Warning
|
|
RAMB36 async control check
|
|
The RAMB36E1 u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ff_im_reg has an input control pin u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ff_im_reg/ADDRARDADDR[14] (net: u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ADDRARDADDR[9]) which is driven by a register (u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/bf2_count_reg[3]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1839#15 Warning
|
|
RAMB36 async control check
|
|
The RAMB36E1 u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ff_im_reg has an input control pin u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ff_im_reg/ADDRARDADDR[14] (net: u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ADDRARDADDR[9]) which is driven by a register (u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/bf2_count_reg[4]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1839#16 Warning
|
|
RAMB36 async control check
|
|
The RAMB36E1 u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ff_im_reg has an input control pin u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ff_im_reg/ADDRARDADDR[14] (net: u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ADDRARDADDR[9]) which is driven by a register (u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/bf2_count_reg[5]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1839#17 Warning
|
|
RAMB36 async control check
|
|
The RAMB36E1 u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ff_im_reg has an input control pin u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ff_im_reg/ADDRARDADDR[14] (net: u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ADDRARDADDR[9]) which is driven by a register (u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/bf2_count_reg[6]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1839#18 Warning
|
|
RAMB36 async control check
|
|
The RAMB36E1 u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ff_im_reg has an input control pin u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ff_im_reg/ADDRARDADDR[14] (net: u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ADDRARDADDR[9]) which is driven by a register (u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/bf2_count_reg[7]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1839#19 Warning
|
|
RAMB36 async control check
|
|
The RAMB36E1 u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ff_im_reg has an input control pin u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ff_im_reg/ADDRARDADDR[14] (net: u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ADDRARDADDR[9]) which is driven by a register (u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/bf2_count_reg[8]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1839#20 Warning
|
|
RAMB36 async control check
|
|
The RAMB36E1 u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ff_im_reg has an input control pin u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ff_im_reg/ADDRARDADDR[14] (net: u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/TW/ADDRARDADDR[9]) which is driven by a register (u_fft_mlkem_axi_slave/u_fft_controller/u_FFT/SU1/bf2_count_reg[9]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1840#1 Warning
|
|
RAMB18 async control check
|
|
The RAMB18E1 u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/mem_reg_reg has an input control pin u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/mem_reg_reg/ADDRARDADDR[10] (net: u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/way_bank_addra[0][0]_26[5]) which is driven by a register (u_Axi_CDC/rFifo/popCC_addressGen_rValid_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1840#2 Warning
|
|
RAMB18 async control check
|
|
The RAMB18E1 u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/mem_reg_reg has an input control pin u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/mem_reg_reg/ADDRARDADDR[11] (net: u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/way_bank_addra[0][0]_26[6]) which is driven by a register (u_Axi_CDC/rFifo/popCC_addressGen_rValid_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1840#3 Warning
|
|
RAMB18 async control check
|
|
The RAMB18E1 u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/mem_reg_reg has an input control pin u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/mem_reg_reg/ADDRARDADDR[12] (net: u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/way_bank_addra[0][0]_26[7]) which is driven by a register (u_Axi_CDC/rFifo/popCC_addressGen_rValid_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1840#4 Warning
|
|
RAMB18 async control check
|
|
The RAMB18E1 u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/mem_reg_reg has an input control pin u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/mem_reg_reg/ADDRARDADDR[5] (net: u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/way_bank_addra[0][0]_26[0]) which is driven by a register (u_Axi_CDC/rFifo/popCC_addressGen_rValid_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1840#5 Warning
|
|
RAMB18 async control check
|
|
The RAMB18E1 u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/mem_reg_reg has an input control pin u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/mem_reg_reg/ADDRARDADDR[6] (net: u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/way_bank_addra[0][0]_26[1]) which is driven by a register (u_Axi_CDC/rFifo/popCC_addressGen_rValid_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1840#6 Warning
|
|
RAMB18 async control check
|
|
The RAMB18E1 u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/mem_reg_reg has an input control pin u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/mem_reg_reg/ADDRARDADDR[7] (net: u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/way_bank_addra[0][0]_26[2]) which is driven by a register (u_Axi_CDC/rFifo/popCC_addressGen_rValid_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1840#7 Warning
|
|
RAMB18 async control check
|
|
The RAMB18E1 u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/mem_reg_reg has an input control pin u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/mem_reg_reg/ADDRARDADDR[8] (net: u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/way_bank_addra[0][0]_26[3]) which is driven by a register (u_Axi_CDC/rFifo/popCC_addressGen_rValid_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1840#8 Warning
|
|
RAMB18 async control check
|
|
The RAMB18E1 u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/mem_reg_reg has an input control pin u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/mem_reg_reg/ADDRARDADDR[9] (net: u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/way_bank_addra[0][0]_26[4]) which is driven by a register (u_Axi_CDC/rFifo/popCC_addressGen_rValid_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1840#9 Warning
|
|
RAMB18 async control check
|
|
The RAMB18E1 u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/mem_reg_reg has an input control pin u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/mem_reg_reg/ADDRBWRADDR[10] (net: u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/way_bank_addra[0][0]_26[5]) which is driven by a register (u_Axi_CDC/rFifo/popCC_addressGen_rValid_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1840#10 Warning
|
|
RAMB18 async control check
|
|
The RAMB18E1 u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/mem_reg_reg has an input control pin u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/mem_reg_reg/ADDRBWRADDR[11] (net: u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/way_bank_addra[0][0]_26[6]) which is driven by a register (u_Axi_CDC/rFifo/popCC_addressGen_rValid_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1840#11 Warning
|
|
RAMB18 async control check
|
|
The RAMB18E1 u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/mem_reg_reg has an input control pin u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/mem_reg_reg/ADDRBWRADDR[12] (net: u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/way_bank_addra[0][0]_26[7]) which is driven by a register (u_Axi_CDC/rFifo/popCC_addressGen_rValid_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1840#12 Warning
|
|
RAMB18 async control check
|
|
The RAMB18E1 u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/mem_reg_reg has an input control pin u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/mem_reg_reg/ADDRBWRADDR[5] (net: u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/way_bank_addra[0][0]_26[0]) which is driven by a register (u_Axi_CDC/rFifo/popCC_addressGen_rValid_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1840#13 Warning
|
|
RAMB18 async control check
|
|
The RAMB18E1 u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/mem_reg_reg has an input control pin u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/mem_reg_reg/ADDRBWRADDR[6] (net: u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/way_bank_addra[0][0]_26[1]) which is driven by a register (u_Axi_CDC/rFifo/popCC_addressGen_rValid_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1840#14 Warning
|
|
RAMB18 async control check
|
|
The RAMB18E1 u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/mem_reg_reg has an input control pin u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/mem_reg_reg/ADDRBWRADDR[7] (net: u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/way_bank_addra[0][0]_26[2]) which is driven by a register (u_Axi_CDC/rFifo/popCC_addressGen_rValid_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1840#15 Warning
|
|
RAMB18 async control check
|
|
The RAMB18E1 u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/mem_reg_reg has an input control pin u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/mem_reg_reg/ADDRBWRADDR[8] (net: u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/way_bank_addra[0][0]_26[3]) which is driven by a register (u_Axi_CDC/rFifo/popCC_addressGen_rValid_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1840#16 Warning
|
|
RAMB18 async control check
|
|
The RAMB18E1 u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/mem_reg_reg has an input control pin u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/mem_reg_reg/ADDRBWRADDR[9] (net: u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/way_bank_addra[0][0]_26[4]) which is driven by a register (u_Axi_CDC/rFifo/popCC_addressGen_rValid_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1840#17 Warning
|
|
RAMB18 async control check
|
|
The RAMB18E1 u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/mem_reg_reg has an input control pin u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/mem_reg_reg/ENARDEN (net: u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/mem_reg_reg_i_1__15_n_0) which is driven by a register (u_Axi_CDC/rFifo/popCC_addressGen_rValid_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1840#18 Warning
|
|
RAMB18 async control check
|
|
The RAMB18E1 u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/mem_reg_reg has an input control pin u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/mem_reg_reg/ENBWREN (net: u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/mem_reg_reg_i_2__13_n_0) which is driven by a register (u_Axi_CDC/rFifo/popCC_addressGen_rValid_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1840#19 Warning
|
|
RAMB18 async control check
|
|
The RAMB18E1 u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/mem_reg_reg has an input control pin u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/mem_reg_reg/WEBWE[2] (net: u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/way_bank_wea[0][0]_14[2]) which is driven by a register (u_Axi_CDC/rFifo/popCC_addressGen_rValid_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
REQP-1840#20 Warning
|
|
RAMB18 async control check
|
|
The RAMB18E1 u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/mem_reg_reg has an input control pin u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/mem_reg_reg/WEBWE[3] (net: u_cpu/dcache/data_ram_way[0].data_ram_bank[0].u/way_bank_wea[0][0]_14[3]) which is driven by a register (u_Axi_CDC/rFifo/popCC_addressGen_rValid_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
|
|
Related violations: <none>
|
|
|
|
|